Wehre to get the RAB System from the short Movie?!
Moderators: fivat, rilliet, Arnaud, nils
Wehre to get the RAB System from the short Movie?!
hi,
sorry for not using the searchfunction *g*
can somebody give me a short hint, where i can get the "advanced"rab or spring or wathatever-system?!
i am pretty frustraided of my forwardlean wich slips permanet into lock position and is full of snow and ice, if i leave it open....wich is sureley the better way for me*g*
it is the system wath you can see on this short movie.
thanxxxxx
bowen
sorry for not using the searchfunction *g*
can somebody give me a short hint, where i can get the "advanced"rab or spring or wathatever-system?!
i am pretty frustraided of my forwardlean wich slips permanet into lock position and is full of snow and ice, if i leave it open....wich is sureley the better way for me*g*
it is the system wath you can see on this short movie.
thanxxxxx
bowen
...sunny days ar the best!
RAB Movie ??
What short movie ?
This one ?
This one ?
- 168XH Pro - Custom Dual 168H - Swallow Undertakeur 185
-- Tignes 19 au 25 mars --
-- Tignes 19 au 25 mars --
Hi Bowen,
you can either try to buy it in a local shop close to you because if you are lucky they can buy the RAB as spare parts from Deeluxe.
If this is not successful you can buy it from Bomberonline in USA:
http://www.bomberonline.com/Store/boots/parts_RAB.cfm
Good luck
Thomas
you can either try to buy it in a local shop close to you because if you are lucky they can buy the RAB as spare parts from Deeluxe.
If this is not successful you can buy it from Bomberonline in USA:
http://www.bomberonline.com/Store/boots/parts_RAB.cfm
Good luck
Thomas
Brand doesn´t matter, the spirit does!
- Felix
- Rank 5
- Posts: 669
- Joined: Thursday 30 October 2003, 20:14
- Location: Austria, but moedling near vienna, bloody 1 hour drive to semmering or rax
- Contact:
I just called Raichle/Deeluxe for a spare part on my boots. .
Just give them a call and ask for the closest certified dealer. This will most likely be a shoeshop. Givem a call, tell them what to order, go there and pick it up.
It's as easy. But be prepared that the RAB will be around 50 Euros. So you might as well score a boot with RAB on ebay. E.G a 325. Then you have some spare parts on top
Just give them a call and ask for the closest certified dealer. This will most likely be a shoeshop. Givem a call, tell them what to order, go there and pick it up.
It's as easy. But be prepared that the RAB will be around 50 Euros. So you might as well score a boot with RAB on ebay. E.G a 325. Then you have some spare parts on top

Hi Bowen
Movie ? not sure, but a lot of post ...
See below some links (to french forum, with pictures) regarding RAB's tuning !
viewtopic.php?t=759
viewtopic.php?t=1088
viewtopic.php?t=1125
viewtopic.php?t=1348
https://www.extremecarving.com/attachments/RAB.wmv
and ... yes, the original is bullshit !
Anyhow, you will only find the original on the market. You must tune it yourself
Arnaud
Movie ? not sure, but a lot of post ...
See below some links (to french forum, with pictures) regarding RAB's tuning !
viewtopic.php?t=759
viewtopic.php?t=1088
viewtopic.php?t=1125
viewtopic.php?t=1348
https://www.extremecarving.com/attachments/RAB.wmv
and ... yes, the original is bullshit !
Anyhow, you will only find the original on the market. You must tune it yourself

Arnaud
Swoard EC Pro2 168H - Swoard EC12 Boots - Gen5 168H - Stoke 162 M
- Felix
- Rank 5
- Posts: 669
- Joined: Thursday 30 October 2003, 20:14
- Location: Austria, but moedling near vienna, bloody 1 hour drive to semmering or rax
- Contact:
hi bowen.
AFAIK you first have to get the original RAB and then modify it. For that look up the old posts, and ask where to get the longer spring. I think that there were even some mods using only parts of the original RAB, namely the upside-down mod. You cannot buy it out of a box.
I am short on money at the moment so I did not try it out yet. (buying slalom race skis (real ones, not just the ones you get in a shop) is my 1. goal, slopes are becoming to crowded to extremecarve all the time)
AFAIK you first have to get the original RAB and then modify it. For that look up the old posts, and ask where to get the longer spring. I think that there were even some mods using only parts of the original RAB, namely the upside-down mod. You cannot buy it out of a box.
I am short on money at the moment so I did not try it out yet. (buying slalom race skis (real ones, not just the ones you get in a shop) is my 1. goal, slopes are becoming to crowded to extremecarve all the time)
Bowen,
if you are referring to this RAB version, it is over there --> http://www.takamaasto.net/boots/spring.avi
The things you need to do:
1. Buy the original one. Try e.g. BlueTomato, they might have it even if it is not listed.
2. Get a pair of softer and longer springs. Browse e.g all your local hardware shops.
3. Do modification work according to your own personal preference. The goal is to get more forward lean than boots originally have. You can find several threads on that topic.
4. Go riding and enjoy your work!
if you are referring to this RAB version, it is over there --> http://www.takamaasto.net/boots/spring.avi
The things you need to do:
1. Buy the original one. Try e.g. BlueTomato, they might have it even if it is not listed.
2. Get a pair of softer and longer springs. Browse e.g all your local hardware shops.
3. Do modification work according to your own personal preference. The goal is to get more forward lean than boots originally have. You can find several threads on that topic.
4. Go riding and enjoy your work!