Support about extremecarving or freecarve/freeride Swoard boards, hardboots and bindings
Moderators: fivat, rilliet, nils
-
nils
- Swoard founder

- Posts: 3043
- Joined: Friday 22 March 2002, 19:22
- Location: Lyon, France - Swoard team
-
Contact:
Post
by nils » Monday 3 May 2004, 13:49
Updated: 20th October 2005
Here is the list for the
last available Swoards of the 1st generation:
PDF listing (needs Acrobat Reader 6)
Discount : -25 to -35%
Send me an email for more info on availability here:
nils@extremecarving.com
Thnx
-
Malecky
- Rank 3

- Posts: 39
- Joined: Friday 13 February 2004, 13:11
- Location: Slovenia!
-
Contact:
Post
by Malecky » Tuesday 4 May 2004, 9:30
Too heavy for M boards

Just my luck...
I hope you fing a good factory that will make them new season and when you do I am booking a 175H until then...I quit snowboarding

-
fivat
- Swoard & EC founder

- Posts: 3039
- Joined: Thursday 21 March 2002, 13:13
- Location: Geneva, Switzerland
-
Contact:
Post
by fivat » Tuesday 25 May 2004, 9:05

On 25th May there are no more boards in the size 175 ! All sold in 3 weeks
Among the 39 last boards of the list, now there are only 18 boards left: in the sizes 161 and 168, all flexes.
Patrice Fivat
-
Malecky
- Rank 3

- Posts: 39
- Joined: Friday 13 February 2004, 13:11
- Location: Slovenia!
-
Contact:
Post
by Malecky » Saturday 5 June 2004, 11:01
Hi!
I am 182cm tall as last measured...I relay wanted the 175H but considering the hight and the crowded slopes in Slovenia...I think the 168 would suite me better...
Is it just me wanting to have a Swoard so bad or am I actually thinking right?

-
nils
- Swoard founder

- Posts: 3043
- Joined: Friday 22 March 2002, 19:22
- Location: Lyon, France - Swoard team
-
Contact:
Post
by nils » Saturday 5 June 2004, 12:54
depends on your weight, feeet etc: send me an email and we'll see how it can fit...
nils@extremecarving.com

-
nils
- Swoard founder

- Posts: 3043
- Joined: Friday 22 March 2002, 19:22
- Location: Lyon, France - Swoard team
-
Contact:
Post
by nils » Friday 2 July 2004, 22:56
The list has been updated: I finished and waxed a 175M and a 168H, another 168M, and added the two Wild Duck Knifer 151.
The two WD are 1995 models ( symetrical ) and good for girls ! sorry we will not ship those boards, but they can be available locally in Lausanne or Geneva! Guys your Girlfriends will love those boards for Xmas!
Nils
-
Matt
- Rank 5

- Posts: 313
- Joined: Tuesday 24 February 2004, 10:26
- Location: Bardonnex, Genève
Post
by Matt » Monday 5 July 2004, 10:52
nils wrote:I added the two Wild Duck Knifer 151.
The two WD are 1995 models ( symetrical ) and good for girls ! Guys your Girlfriends will love those boards for Xmas!
Hi Nils!
Good to know there is some stuff for girl. My girlfriend is 1.74m and riding well on a "freeride" Salomon board.
Could this board be ok for her or is she too tall?
Thanx!

M@.
SWOARD 168H / BLAST 162 / Burton Race / SB324
-
nils
- Swoard founder

- Posts: 3043
- Joined: Friday 22 March 2002, 19:22
- Location: Lyon, France - Swoard team
-
Contact:
Post
by nils » Monday 5 July 2004, 15:06
She is a bit tall for those boards, unless she is in the 50 -55 kg range max...

This board is better for people in the 155-165 cm range!
Nils
-
Matt
- Rank 5

- Posts: 313
- Joined: Tuesday 24 February 2004, 10:26
- Location: Bardonnex, Genève
Post
by Matt » Monday 5 July 2004, 15:11
Thank you Nils!
She is not in the range...

M@.
SWOARD 168H / BLAST 162 / Burton Race / SB324
-
skywalker
- Rank 5

- Posts: 815
- Joined: Saturday 3 August 2002, 11:24
- Location: Fribourg (CH)
Post
by skywalker » Sunday 11 July 2004, 22:06
-
Silber
- Moderator

- Posts: 1953
- Joined: Tuesday 6 April 2004, 12:40
- Location: Milan, Italy
-
Contact:
Post
by Silber » Monday 12 July 2004, 18:08
Patrice, Nils,
I might have a client for one of your WD. Do you have a picture I can show her?
Ciao
Francesco
-
nils
- Swoard founder

- Posts: 3043
- Joined: Friday 22 March 2002, 19:22
- Location: Lyon, France - Swoard team
-
Contact:
Post
by nils » Monday 12 July 2004, 22:20
Remember we will not ship those boards: maybe bring them to the next year ECS
you can see a picture here:
http://www.swoard.com/gallery/albums/sw ... dchris.jpg
the grey board is the same model for giant slalom. The ones we have are SL models. Maybe peter vu can send us a picture since his bro John has that SL model! peter? John?
Nils
-
Silber
- Moderator

- Posts: 1953
- Joined: Tuesday 6 April 2004, 12:40
- Location: Milan, Italy
-
Contact:
Post
by Silber » Tuesday 13 July 2004, 17:03
Thanks Nils

,
if John could post a picture it would be helpful as well.
For the selling location, I still have the sticker for the Swiss highway from the last trip and Geneva's night was fun

, so it would not be a problem.. maybe next time I'll come to Lausanne tough

.
Ciao
Francesco
Francesco Swoard (1G175M 3G175M020 e 168H054),Wingergun205,Shaman193,TTubeS1/174GS,F2 (RS183'08 e'06/Lancelot/Slbpfl),Virus (Hurric./Dragon),Pogo (Hardc./Imp.),Burton (FP/Speed/PJ/CustomX),WildDuckFantasy, Duret168, OxygenProton168GS
-
skywalker
- Rank 5

- Posts: 815
- Joined: Saturday 3 August 2002, 11:24
- Location: Fribourg (CH)
Post
by skywalker » Sunday 21 November 2004, 11:44
Hi Nils,
found on your HP this sentence: "Only 10 boards are left".
Would be interesting to know, which lengths and stiffnessesthey are. Maybe you can list them here?
Thanks
Tom
free extreme carving
-
Hans
- Rank 5

- Posts: 933
- Joined: Wednesday 19 March 2003, 21:17
Post
by Hans » Sunday 21 November 2004, 21:39
skywalker wrote:Hi Nils,
found on your HP this sentence: "Only 10 boards are left".
Would be interesting to know, which lengths and stiffnessesthey are. Maybe you can list them here?
Thanks
Tom
May be not neccessary anymore. I have read on the french forum that the crew is testing new SWOARDs already and that news will be coming out soon!!!. So I hope for one who wants to buy a new one, they will be lucky this season. You can read it overhere. I am very curious about it!
viewtopic.php?p=7635#7635 (have translated it with this programm, works fine for me:
http://216.239.37.104/translate_c?hl=en ... uage_tools
(Thanks to Ablazespy

)
Greets, Hans.