Foot size for Deeluxe 325

Various topics, technical questions, announcements, events, resorts, ...

Moderators: fivat, rilliet, Arnaud, nils

tohass
Rank 3
Rank 3
Posts: 29
Joined: Wednesday 7 January 2009, 19:32
Location: Northern Europe

Foot size for Deeluxe 325

Post by tohass » Wednesday 7 January 2009, 19:36

I'm going to order a pair of Deeluxe 325 from Internet and have no possibility to try them out first.
My feet are 280mm long and 100/105mm wide and wonder if I should have size 28, 28.5 or 29?

Anyone with a pair that could let me know which size you have on the boots and the size of your feet?

User avatar
pokkis
Rank 5
Rank 5
Posts: 1804
Joined: Monday 1 April 2002, 19:46
Location: Finland

Post by pokkis » Wednesday 7 January 2009, 19:38

I would say that take 28 with thermoliners.

User avatar
Hans
Rank 5
Rank 5
Posts: 933
Joined: Wednesday 19 March 2003, 21:17

????

Post by Hans » Wednesday 7 January 2009, 22:29

My feet are 25,8 cm and 26,2cm I have mondo 27 because I have a huge arch in both feet. So it all depends if you have 'normal' feet. But if that's the case take mondo 28 or 27,5 (this is mondo 28 with a mondo 27,5 liner, the last one if your feet have low volume, especially in the heels)

tohass
Rank 3
Rank 3
Posts: 29
Joined: Wednesday 7 January 2009, 19:32
Location: Northern Europe

Post by tohass » Thursday 8 January 2009, 8:38

I belive I have normal feet but maybe less wide than normal which I believe is the same as low volume.
I have been trying different skiing boots to see what size I need but it's very different from one manufacturer to another so that didn't help me at all.

So you don't think the 27,5 will be too short?

User avatar
pokkis
Rank 5
Rank 5
Posts: 1804
Joined: Monday 1 April 2002, 19:46
Location: Finland

Post by pokkis » Thursday 8 January 2009, 8:46

Outes shells are only for full cm sizes.

User avatar
Hans
Rank 5
Rank 5
Posts: 933
Joined: Wednesday 19 March 2003, 21:17

thermoliners

Post by Hans » Thursday 8 January 2009, 9:19

The new thermoliners in the new Deeluxe boots aren't called thermoliners anymore. Those are (chinese or taiwanese)thermofit liners and needn't baking in the oven anymore. They are set to your feet in the boots when they are getting warmed up by your own bodywarmth. Thermofitliners are only available in rounded sizes so 26, 27, 28 and so on. The standard liners are available in half sizes. So a mondoboot 28 could have a 27,5 liner. I find the new thermofitliners crappy, especially when outside temps come above zero. I am swimming in it then, and the heelhold is getting worse then as a result of your body warmth and the liners get soaked up, but that's just me, may be others have other experiences. So an advice on your mondo here is difficult. So I had say go for the 28, and if possible get real thermoliners (no thermofit). If those boots are too wide, you always could take a custommade foamliner in your boots (lifetimefit). Or order them with blue tomato and ask them if you could send them back if it isn't the right size. Phone them, they are nice people to talk with.

User avatar
Felix
Rank 5
Rank 5
Posts: 669
Joined: Thursday 30 October 2003, 20:14
Location: Austria, but moedling near vienna, bloody 1 hour drive to semmering or rax
Contact:

Post by Felix » Thursday 8 January 2009, 14:40

Attention, the shell increases in size on .5. So 28 and 28.5 is the same shell. Therefore I would assume the liner in the 28.5 to be 28.5 size and also being in the 28 model.

This is the same for all skiboots, please pay attention!!!!!!!!!
In fact the only company having different size jumps is burton (at least for softboots, I don't know about the old Burton hardboots=, where the size of shell goes up with each .5 US. So US 8 and US 8.5 have the same shell!

With feet being 280mm I would buy Mondo 27.5 and see a bootfitter to get you in there. On the other hand 105mm is pretty wide for your feet length (when using the 325 which is very tight in forefoot). If you have no good bootfitter around I would get the 28.5 with thermoflex. (the thermoflex shrinks down to your footsize on baking anyhow).
Swoard 3D - 168M
http://Openmtbmap.org - get the most popular maps for Mountainbiking in Europe...

User avatar
Transistor Rhythm
Rank 5
Rank 5
Posts: 302
Joined: Monday 10 March 2008, 9:46
Location: Eindhoven, The Netherlands

Post by Transistor Rhythm » Thursday 8 January 2009, 15:24

So thermoflex is still optional? It's still on the site but not default anymore for any boot.

User avatar
Hans
Rank 5
Rank 5
Posts: 933
Joined: Wednesday 19 March 2003, 21:17

Thermoflex

Post by Hans » Thursday 8 January 2009, 16:32

Deeluxe boots are only sold with standard or thermofit liners.

dr. Zoidberg
Rank 4
Rank 4
Posts: 63
Joined: Friday 4 January 2008, 14:30
Location: Siena

Post by dr. Zoidberg » Friday 9 January 2009, 19:37

are you sure?

they are called thermoflex on deeluxe website

http://www.deeluxe-hardboots.com/html/liner.1.html

dr. Zoidberg
Rank 4
Rank 4
Posts: 63
Joined: Friday 4 January 2008, 14:30
Location: Siena

Post by dr. Zoidberg » Friday 9 January 2009, 19:50

My feet are 29cm long and I bought a pair of track 325 with thermoflex liners, size 29mp.
They are very thight but, after baking, they feel comfortable while surfing.

Please keep in mind that these are my first pair of hard boots :roll:

User avatar
Hans
Rank 5
Rank 5
Posts: 933
Joined: Wednesday 19 March 2003, 21:17

Liners

Post by Hans » Friday 9 January 2009, 19:58

dr. Zoidberg wrote:are you sure?

they are called thermoflex on deeluxe website

http://www.deeluxe-hardboots.com/html/liner.1.html
The grey/white ones are called thermoflex liners. The new dark ones with spiderthreads are the so called speed liners/thermofit liners = only bodywarmth is needed. At the site I see they have changed the name of the speed liner in thermoflex liner, naugthies :naughty:
Attachments
JN36PtixCrqPEBWgen8Aie-30.jpeg
JN36PtixCrqPEBWgen8Aie-30.jpeg (5.25 KiB) Viewed 12396 times
HE8ihSjh6glUEBWgen8Aie-30_image.jpeg
HE8ihSjh6glUEBWgen8Aie-30_image.jpeg (27.7 KiB) Viewed 12396 times

dr. Zoidberg
Rank 4
Rank 4
Posts: 63
Joined: Friday 4 January 2008, 14:30
Location: Siena

Post by dr. Zoidberg » Friday 9 January 2009, 20:05

they also say:
100% mouldable liner (with Deeluxe TF oven)
I'm no expert, but I baked mines and it worked.

User avatar
starikashka
Rank 5
Rank 5
Posts: 963
Joined: Friday 29 February 2008, 20:07
Location: Russia
Contact:

Post by starikashka » Friday 9 January 2009, 20:48

pokkis - you using thermoflex liner same size as your feet? How long it keeps tight?
i`m learning

User avatar
Hans
Rank 5
Rank 5
Posts: 933
Joined: Wednesday 19 March 2003, 21:17

I know...

Post by Hans » Friday 9 January 2009, 20:49

........... the guys from Blue Tomato told me that the backing of those speedliners isn't neccessary but could be done (was told me 1 year ago when I bought track 700). Nice you like those liners. They hold moderately in the cold and poor in warm temp, just my 2 cents.

Locked