visit plates

Post by **Willow 15** » Friday 11 July 2008, 7:48

Can anyone help me please? Does anyone know where i could buy visit plates in Europe. Any help would be much appreciated.

Post by **codighel** » Friday 11 July 2008, 8:58

www.rabansersnowboards.com
go to the on line store

Post by **The Blitz** » Friday 11 July 2008, 11:33

viewtopic.php?p=31856#31856

Post by **pokkis** » Friday 11 July 2008, 12:09

Anyone seen anywhere dimensions of these? and required insert placement spec on board?
Same thing with Gerab plates, can not find any specs on web?

Post by **Hans** » Friday 11 July 2008, 12:51

pokkis wrote:Anyone seen anywhere dimensions of these? and required insert placement spec on board?
Same thing with Gerab plates, can not find any specs on web?

Hi, Pokkis

You can find something about those plates overhere. Just fit in the standard 4x4 according this website info.

http://www.scorpionracingcenter.com/cat ... ucts_id=70

Post by **pokkis** » Friday 11 July 2008, 15:03

I was there but did not find any dimenssions.
I know/see that Gerab will fit to 4*4 but no idea about how wide they are? Silly marketing

Post by **codighel** » Friday 11 July 2008, 20:05

pokkis wrote:I was there but did not find any dimenssions.
I know/see that Gerab will fit to 4*4 but no idea about how wide they are? Silly marketing

I tested them....you need inserts on the board,it does not fit the 4x4 and the feeling is totally different from the gerab plates,i I'd say mouch better..infact Mr Rabanser have tested them with me and now he sells them

Post by **pokkis** » Friday 11 July 2008, 20:18

Have you any dimenssions for extra insert location?
I ordered them and my new board is still in production line so i could get them to board if i know placement for them.

Post by **Willow 15** » Friday 11 July 2008, 20:31

Thanks for the replies.

pokkis wrote:Have you any dimenssions for extra insert location?
I ordered them and my new board is still in production line so i could get them to board if i know placement for them.

What board are you getting Pokkis, cause the reason i asked the original question is that I am getting an SG and they already have the inserts built in.

Post by **pokkis** » Friday 11 July 2008, 20:39

My titanal custom one is build by Prior. But i could arrange them to few other boards too, possible.
Do all SGs have thes required extra inserts? do you know dimensions for inserts?

Post by **codighel** » Friday 11 July 2008, 21:38

pokkis wrote:My titanal custom one is build by Prior. But i could arrange them to few other boards too, possible.
Do all SGs have thes required extra inserts? do you know dimensions for inserts?

..yes,they have it ! about the fact of the stance from the inserts....i've no idea,but i think it should match somehow with the plate.

good choice for your Prior.Ilike it too.is the 2009 model?measure?

Post by **Willow 15** » Friday 11 July 2008, 21:52

Nice choice (the Prior) there is a good review at hardbooter.com by Billy Boardy . Here is a link so you can see pictures of the new SG's. http://www.bomberonline.com/VBulletin/s ... ht=08%2F09
I am sure you will agree they look fantastic. The SG people are really great and really look after you. I don't know the dimensions of the visit plate, the website is very uninformative but you could try asking at bomberonline. Hope this helps.

Post by **pokkis** » Friday 11 July 2008, 22:08

2009 Fatjack metal wcr 187 as 23cm wide

Post by **codighel** » Monday 14 July 2008, 18:03

pokkis wrote:2009 Fatjack metal wcr 187 as 23cm wide

did you buy the board from the producer in wistler or there are other ways?

Post by **pokkis** » Monday 14 July 2008, 18:08

Prior

If we meet in winter you can make test run if interested

I've got also some other new goodies on the way, more when i can show some pictures. It is gonn abe one interesting winter again.

ExtremeCarving FORUM

visit plates

visit plates

VIST

Gerab