Various topics, technical questions, announcements, events, resorts, ...
Moderators: fivat, rilliet, Arnaud, nils
-
tomppa
- Rank 2

- Posts: 14
- Joined: Tuesday 5 June 2007, 19:33
Post
by tomppa » Wednesday 7 November 2007, 12:20
Hello
I like to hear if someone has seen/tryed deeluxe hybrid boots. How is it compared to suzuka/indy and skiboots in stifnes, etc.
http://www.bestboards.gr/catalog/produc ... 65717f3bcd
I cant find any details at deeluxe.com site
Its coming, Tomppa
by Tomppa
-
Ohawa
- Rank 5

- Posts: 192
- Joined: Monday 23 January 2006, 13:44
- Location: Neuchâtel
-
Contact:
Post
by Ohawa » Wednesday 7 November 2007, 15:36
Try to have a look at Raichle ski shoes site... This is a ski shoe, I remember Raichle were producing a modification of snowboard Track 325 shoes for skiers a few years ago. Stiffness should be lower than that of both Indy and Suzuka.
Board? Just a Choc, 180...
-
floatingmatjaz
- Rank 4

- Posts: 52
- Joined: Tuesday 26 December 2006, 0:23
- Location: Italia, Slovenija
Post
by floatingmatjaz » Wednesday 7 November 2007, 23:08
hm. I saw a pair in the Goltes shop in Ljubljana.
actually I didn't test them and didn't try the stiffness... But they seemed good quality boots... about the same as T325 or T225, with the 5 point forward lean mechanism (...it can be also seen in your photo)
but with that big ski-heel and toe
the length of the sole should not be a big problem with "fat" extremecarving boards... (even though - to prevent boot overhang - one should use higher binding angles than those suggested by the producer)
Gen 3 168H; Nidecker Tornado 183; Elan Ballistic 171
Phiokka
Upz RC10; AF700TS + BTS
-
Felix
- Rank 5

- Posts: 669
- Joined: Thursday 30 October 2003, 20:14
- Location: Austria, but moedling near vienna, bloody 1 hour drive to semmering or rax
-
Contact:
Post
by Felix » Wednesday 7 November 2007, 23:54
I think they should be great for easy skiing and little Hiking, but wouldn't use them for skiing onslope (not stiff enough laterally) or snowboard carving (too long compared to real snowboard boots).
If you wan't a cheap and great boot for skiing get a Raichle Flexon whith which you can hike too, and use them once in a while for snowboarding.
Swoard 3D - 168M
http://Openmtbmap.org - get the most popular maps for Mountainbiking in Europe...
-
Mats
- Rank 3

- Posts: 23
- Joined: Tuesday 28 May 2002, 21:14
- Location: Stockholm, Sweden
Post
by Mats » Friday 9 November 2007, 23:29
I have them in stock at alpinepunk.com. They are same dimensions as 325 etc etc and work perfect for snowboarding and randonee/ easy carvingskis. To soft for hard pist riding thou. If you have kids and need to ski sometimes and just want one pair it´s a good compromise. BUT they are not INTEC compatible and they give a bit more overhang than snowboard boots.
/M
-
The Blitz
- Rank 5

- Posts: 1532
- Joined: Friday 4 October 2002, 13:59
- Location: IdF | 91
-
Contact:
Post
by The Blitz » Saturday 10 November 2007, 9:15
Mats wrote:If you have kids and need to ski sometimes and just want one pair it´s a good compromise.
Interesting

- 168XH Pro - Custom Dual 168H - Swallow Undertakeur 185
-- Tignes 19 au 25 mars --
-
tomppa
- Rank 2

- Posts: 14
- Joined: Tuesday 5 June 2007, 19:33
Post
by tomppa » Saturday 10 November 2007, 11:01
Thanks for your replys, but i think its clear that those arent stiff as skiboots and onpistskiing is not their strongest point.
So i think its too much compromise to my skiing, and i think i keep two boots.
One week to go, Tom

by Tomppa
-
Franck Lehmans
- Rank 5

- Posts: 243
- Joined: Wednesday 31 January 2007, 20:14
- Location: Préverenges, Suisse
Post
by Franck Lehmans » Saturday 10 November 2007, 14:53
Personatly, I ride ski and snowboard with my Deeluxe Indy (the orange one). I'm use to ski with them and find that it works well. I use them for skiing about one or two weeks pro years and also one or two weeks to carve with my snowboard.
When I buy them, my reflexion was that alpin boots are stiff enougth to ride ski. And the Indys are real stiff with the original spring ! I didn't wanted to buy two pairs because of the price.
I'm glad with my choice.
Franck, Préverenges, Suisse
-
pokkis
- Rank 5

- Posts: 1804
- Joined: Monday 1 April 2002, 19:46
- Location: Finland
Post
by pokkis » Saturday 10 November 2007, 14:57
One option might be Indys and BTS combination. Having softer spring for boarding and stiffer for sking.
With BTS changing spring is very fast and easy

-
Hans
- Rank 5

- Posts: 933
- Joined: Wednesday 19 March 2003, 21:17
Post
by Hans » Saturday 10 November 2007, 17:54
Just a skiboot................ with some more forwardflex as a normal skiboot.
-
tomppa
- Rank 2

- Posts: 14
- Joined: Tuesday 5 June 2007, 19:33
Post
by tomppa » Saturday 10 November 2007, 21:47
Franck, how do you fast your indy to skibindings?
Do bindings release if needed?
I have now suzukas and BTS. Yellow and blue springs.
by Tomppa