SnowPro Race bindings and canting

Post by **Guy** » Friday 17 March 2006, 22:04

Hi,

Maybe some of you SnowPro Race binding users can help me here.

I've switched back to using my SnowPros instead of my F2 Titanium Intecs because the SnowPros have more lateral flex for EC. BUT my SnowPro Race bindings have a non-removable canting as part of the design. Apart from being not recommended for EC, I find this canting pretty uncomfortable to ride with (high pressure on the outer side of my rear leg), especially with my rather high binding angles of 62/57.

According to the SnowPro Web site www.snowpro.de all sorts of toe- and heellift and canting is available for this binding, but I can't find a shop in Vienna that still stocks SnowPro, where I might be able to get non-canting bits for my SnowPros.

Do any of you SnowPro Race binding owners have any suggestions for me?

Cheers,
Guy

Post by **U-turn** » Saturday 18 March 2006, 9:33

What a f*** are you asking! Knock simple on the next door in Vienna!

SnowPro is now own by an Austrian firma.
They don't produce the Snowpro Race now, but they told me, they store all the molds, tools etc.
for a possible Next production (not like Northwave).

They should have some complete Bindings and also spare-parts on stock.

Phone up: Motion Sport Austria Vienna, A - 1617 42 82 20

good luck

(The SnowPro Race is a good binding. I use them and I hold three of them in orginal Box as a permanent stock in my safe.)

Post by **Guy** » Sunday 19 March 2006, 22:10

Thanks for the info! And you are definitely right about the SnowPro Race being a good binding

Guy

Post by **x-eff** » Monday 20 March 2006, 7:10

Maybe ask a Volkl dealer. Their tiger force / rage binding looks like an sp race.