Deeluxe Boot with 320mm Plate and SnowPRO RACE

Post by **mrtko** » Sunday 15 January 2006, 22:13

I tried to fit my equipement to the here in the forum suggested way.
.... when ever possible use a standard binding (without Intec).

Now i got my SNOWPRO Race.

And there is the problem. My Deeluxe Suzuka with base plate size 320 (= sitze EU 47) doesn´t fit in the binding. It can´t be expand so much to get my boot in.

Do you all have any experiances what to do now?

Is there any suggestion how to enlarge the baseplate!

Thanks for your advises!

Post by **The Blitz** » Tuesday 17 January 2006, 14:10

I know with Raichle 324 in 31,5 mondo, F2Ti is very good. You can easily adjust your stance boots (front/rear).

On TD2, 31.5M is max size. We can't adjust boots but...now there is available at Bomber Industrie a long plate version.
See also Catek, with long plate version...

Look here, there is Deeluxe/Raichle measure.

Post by **Arnaud** » Tuesday 17 January 2006, 15:01

mrtko wrote:Is there any suggestion how to enlarge the baseplate!

Please, post some pictures of your bindings (top view, bottom view, side view). We'll see if any modification is possible to enlarge binding.

Post by **SITO** » Tuesday 17 January 2006, 15:20

Snowpro race were built in two sizes M &L
Size M have only two bolts in the toe and hell block

Size L have 4 bolts in the toe&heel block.

Check if your size is M or L

Sito

Post by **The Blitz** » Tuesday 17 January 2006, 15:48

Snowpro Race LTD is the same as Volk or Blast.
Volk size is 37 to 47 :
http://www.au-vieux-campeur.fr/gp/asp/p ... dprd=72037

Bast LTD 5 to 13

:
http://www.hammersnowboards.com/product ... ast_fr.php

Post by **Guy** » Tuesday 31 January 2006, 0:12

If you have Intec heels on your boots, try putting the standard ones back on. I currently ride using standard heels with my SnowPro Race bindings, but if I use the Intec heels, the boots don't fit in the bindings anymore unless I adjust the bindings out a bit.

Guy