Extremecarver Gen4 question
Moderators: fivat, rilliet, nils
Extremecarver Gen4 question
Hi,
I am a beginner at EC (been on a Dual for one season) and my weight varies between 86-89kg. I am just under 5 ft 10 in. My feet size is 29-30 mondo (not been fitted for hard boots yet so not exactly sure). I am looking for a EC Gen4 - I guess due to feet size, I should go for the 175, but should it be M or H?
cheers,
Slayer
I am a beginner at EC (been on a Dual for one season) and my weight varies between 86-89kg. I am just under 5 ft 10 in. My feet size is 29-30 mondo (not been fitted for hard boots yet so not exactly sure). I am looking for a EC Gen4 - I guess due to feet size, I should go for the 175, but should it be M or H?
cheers,
Slayer
Soft: Dual 175, Burton Driver-X, Flux CV
Hard: Gen4 175M, UPZ RC10, F2 Race Titanium
Hard: Gen4 175M, UPZ RC10, F2 Race Titanium
Re: Extremecarver Gen4 question
Hi,
1m78 height, 86-89 kg, Mondo 29-30 : a 175M should be perfect to learn EC
1m78 height, 86-89 kg, Mondo 29-30 : a 175M should be perfect to learn EC
Swoard EC Pro2 168H - Swoard EC12 Boots - Gen5 168H - Stoke 162 M
Re: Extremecarver Gen4 question
Thanks Arnaud. Can I ask what boots you use? Choices around these days seem to be Deeluxe (Track 700?) or UPZ (RC10). I looked at the gear pages for boots, but I couldn't see a comparison between these two.
cheers,
Slayer.
cheers,
Slayer.
Soft: Dual 175, Burton Driver-X, Flux CV
Hard: Gen4 175M, UPZ RC10, F2 Race Titanium
Hard: Gen4 175M, UPZ RC10, F2 Race Titanium
- Capykiller
- Rank 5
- Posts: 148
- Joined: Sunday 21 October 2012, 2:04
- Location: Essen
Re: Extremecarver Gen4 question
Me again,
Slayer, you have to check if the Deeluxe or UPZ fits although the size is the same. I found the Deeluxe narrower and my feet hurt after just a few minutes. Try both.
Slayer, you have to check if the Deeluxe or UPZ fits although the size is the same. I found the Deeluxe narrower and my feet hurt after just a few minutes. Try both.
SWOARD Extremecarver Pro 2 168H, SWOARD Bindung Redline, SWOARD UPZ EC 12
Re: Extremecarver Gen4 question
Thanks Capykiller,
That's good information. Going off-topic for this thread, but I feel there isn't a lot of info around current boot tech on this site, Or maybe there is, but in distributed posts and not stickies. Perhaps it's because hardbooters hang on to the same boots for centuries (so once you are 'in', you forget about the hassle it took to get good boots), while softbooters are 'encouraged' to change boots every few years. Those clever Burton marketeers...![Smile :-)](./images/smilies/icon_smile.gif)
I will have another look at the threads to find the places to go where they will stick with you until you get the boots right, springs or not for beginner, etc.
cheers,
Slayer.
That's good information. Going off-topic for this thread, but I feel there isn't a lot of info around current boot tech on this site, Or maybe there is, but in distributed posts and not stickies. Perhaps it's because hardbooters hang on to the same boots for centuries (so once you are 'in', you forget about the hassle it took to get good boots), while softbooters are 'encouraged' to change boots every few years. Those clever Burton marketeers...
![Smile :-)](./images/smilies/icon_smile.gif)
I will have another look at the threads to find the places to go where they will stick with you until you get the boots right, springs or not for beginner, etc.
cheers,
Slayer.
Soft: Dual 175, Burton Driver-X, Flux CV
Hard: Gen4 175M, UPZ RC10, F2 Race Titanium
Hard: Gen4 175M, UPZ RC10, F2 Race Titanium
- joemzl
- Moderator
- Posts: 1399
- Joined: Tuesday 5 September 2006, 20:29
- Location: where Varus died in Germany // above you see, why I came to snowboarding: the Vitelli Turn
Re: Extremecarver Gen4 question
Choosing hardboots is easy.
If you want to buy new ones you can choose between DeeLuxe, UPZ and ---- nothing else.
Which ones? Depends on which brand fits your foot better.
Model: you like it stiff - you can choose between Track 700 and RC10
Really soft is Track 225. In the middle is Track 325 and RC8
No experience till now with Track 425 (Pro) and Free69
Springs? - always recommended.
Easy isn´t it?
Between how many softboots would I have to choose?
![Silly :silly:](./images/smilies/new_silly.gif)
![Laughing :lol2:](./images/smilies/lol.gif)
If you want to buy new ones you can choose between DeeLuxe, UPZ and ---- nothing else.
![Silly :silly:](./images/smilies/new_silly.gif)
Which ones? Depends on which brand fits your foot better.
Model: you like it stiff - you can choose between Track 700 and RC10
Really soft is Track 225. In the middle is Track 325 and RC8
No experience till now with Track 425 (Pro) and Free69
Springs? - always recommended.
Easy isn´t it?
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Between how many softboots would I have to choose?
![Silly :silly:](./images/smilies/new_silly.gif)
![Silly :silly:](./images/smilies/new_silly.gif)
![Silly :silly:](./images/smilies/new_silly.gif)
Extreme Dreamer every night
Swoard Pro 175M +Race Ti Flex, Plasma CE185/17, Swoard Stoke 162M
Swoard Pro 175M +Race Ti Flex, Plasma CE185/17, Swoard Stoke 162M
Re: Extremecarver Gen4 question
LOL, thanks jeomzl,
There is still also the Head Stratos Pro, though not as easily available I guess. Not sure you can attach springs without modification, though.
Do they all have the same size shell? I would prefer the smaller external size, having large feet (narrow at ankles, wider at the toes).
As to flex - have no idea yet!
PS.yes with softboots you have far more choice, but you wont be coming back to the shop for modifications! Anyone with any tips on the best shops for fitting around the Zürich region?
cheers,
Slayer.
There is still also the Head Stratos Pro, though not as easily available I guess. Not sure you can attach springs without modification, though.
Do they all have the same size shell? I would prefer the smaller external size, having large feet (narrow at ankles, wider at the toes).
As to flex - have no idea yet!
![Smile :-)](./images/smilies/icon_smile.gif)
PS.yes with softboots you have far more choice, but you wont be coming back to the shop for modifications! Anyone with any tips on the best shops for fitting around the Zürich region?
cheers,
Slayer.
Soft: Dual 175, Burton Driver-X, Flux CV
Hard: Gen4 175M, UPZ RC10, F2 Race Titanium
Hard: Gen4 175M, UPZ RC10, F2 Race Titanium