ACSS - Advanced Carving Spring System for Deeluxe

Various topics, technical questions, announcements, events, resorts, ...

Moderators: fivat, rilliet, Arnaud, nils

Locked
User avatar
Abrax
Swoard team
Swoard team
Posts: 422
Joined: Sunday 25 November 2007, 19:12
Location: Cracow, Poland
Contact:

Re: ACSS - Advanced Carving Spring System for Deeluxe

Post by Abrax » Monday 16 January 2012, 8:18

Can you show me these pictures? I didn't mount any ACSS for Deeluxe in UPZ. It has to be Arnaud's system...
www.carvingskills.com
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!

User avatar
Alexander
Rank 0
Rank 0
Posts: 3
Joined: Tuesday 15 March 2011, 9:31
Location: Sakhalin Island, Russia
Contact:

Re: ACSS - Advanced Carving Spring System for Deeluxe

Post by Alexander » Tuesday 17 January 2012, 9:20

Abrax,

Here are some photos of UPZ RC 10 with modified ACSS.
The boot's owner confirmed that it is Arnaud's system ))

http://velvet.pro/forum/viewtopic.php?s ... f=13&t=496

User avatar
Arnaud
Administrator
Administrator
Posts: 3277
Joined: Friday 24 January 2003, 9:00
Location: Paris - IdF 95

Re: ACSS - Advanced Carving Spring System for Deeluxe

Post by Arnaud » Tuesday 17 January 2012, 9:26

Yes, it's my system (Actually, the bottom part is slightly different)
Swoard EC Pro2 168H - Swoard EC12 Boots - Gen5 168H - Stoke 162 M

Fefe
Rank 4
Rank 4
Posts: 70
Joined: Monday 21 November 2011, 22:06
Location: Reunion Island

Re: ACSS - Advanced Carving Spring System for Deeluxe

Post by Fefe » Tuesday 24 January 2012, 17:11

Hi all

I spent last week snowboarding with Abrax' ACSS on raichle 423s. The system is simply a must-have. Even though I'm not a EC rider (yet :evil3: ), it makes life easier to lean forward and backward, and thus helping in learning the different techniques (rotational swiss and push-pull methods and finally EC :pray: ). Also, Abrax offers great support. I had many questions about ordering, mounting, I thank him for all the help. :clap2:
Overall, there is no doubt raichle/deeluxe owners should get the ACSS on their boots

Keep up the good work! :bravo:
Fefe

sijp
Rank 0
Rank 0
Posts: 1
Joined: Friday 13 January 2012, 1:03
Location: Grunn, NL

Re: ACSS - Advanced Carving Spring System for Deeluxe

Post by sijp » Wednesday 8 February 2012, 20:28

Hi Abrax,
gone boarding??
You've got pm

User avatar
Abrax
Swoard team
Swoard team
Posts: 422
Joined: Sunday 25 November 2007, 19:12
Location: Cracow, Poland
Contact:

Re: ACSS - Advanced Carving Spring System for Deeluxe

Post by Abrax » Wednesday 8 February 2012, 22:13

Sure! Slovakia, Oravice, www.meanderpark.com Perfect!
www.carvingskills.com
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!

lardybenoit
Rank 4
Rank 4
Posts: 89
Joined: Sunday 21 December 2008, 3:01
Location: France-Metz(57)
Contact:

Re: ACSS - Advanced Carving Spring System for Deeluxe

Post by lardybenoit » Sunday 12 February 2012, 12:11

I received my new springs and setup is pretty simple.
I had to review some modifications on my hard boots to avoid any inconvenience with the screw.
Attachments
bl1.jpg
bl2.jpg
bl3.jpg
SWORD Gen4 + Gen5 168M/ Fix F2 intec titanium/ Raichle ACSS
Localisation: Metz

User avatar
Abrax
Swoard team
Swoard team
Posts: 422
Joined: Sunday 25 November 2007, 19:12
Location: Cracow, Poland
Contact:

Re: ACSS - Advanced Carving Spring System for Deeluxe

Post by Abrax » Monday 13 February 2012, 22:24

Please consider taking the special m4 screw out once more and sand it down 2mm to make it shorter.
This was not said before, because not many people have decided to go into MOD1 . The screw should not touch the liner, but it is possible, so some tuning is still suggested.

Nice colors! I like it with these 323!
www.carvingskills.com
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!

User avatar
christian61
Rank 5
Rank 5
Posts: 316
Joined: Friday 17 November 2006, 19:40
Location: Northern Bavaria, Germany

Re: ACSS - Advanced Carving Spring System for Deeluxe

Post by christian61 » Tuesday 14 February 2012, 8:15

With my Raichle 223s, even a shorter screw didn't solve the problem, because the gap between the two parts of the shell is too thin. When straightening the legs after bending the knees, the nut (with the 4 thorns) sometimes gets stuck on the upper shell, especially with the mod. I tested this with an old Raichle 225 shell.
I therefore chose the way described on page 9 to attach the lower part of the U-profile to the shell.

Christian
SWOARD EXTREMECARVER GEN4 168s + 161m, Deeluxe 225 + ACSS

User avatar
Abrax
Swoard team
Swoard team
Posts: 422
Joined: Sunday 25 November 2007, 19:12
Location: Cracow, Poland
Contact:

Re: ACSS - Advanced Carving Spring System for Deeluxe

Post by Abrax » Tuesday 14 February 2012, 12:23

I've made a chamfer on the upper side of the lower shell. Exactly in the place where the blocking could occur. Nothing like blocking has ever happened...
www.carvingskills.com
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!

Raikkas
Rank 0
Rank 0
Posts: 3
Joined: Thursday 16 February 2012, 17:58

Re: ACSS - Advanced Carving Spring System for Deeluxe

Post by Raikkas » Tuesday 21 February 2012, 21:20

Abrax, you have PM

(...in my PM, there is one mistake... My boots are Deeluxe Track325...)

Cheers ! :bravo:

Raikkas

User avatar
Goldfinger007
Rank 2
Rank 2
Posts: 14
Joined: Saturday 3 January 2009, 22:30
Location: Valencia. Spain.

Re: ACSS - Advanced Carving Spring System for Deeluxe

Post by Goldfinger007 » Saturday 25 February 2012, 17:34

Where can I buy the acss for my Head Startos?
Based in Cerler, Spain
Swoard 168 S
Head Strat. 27,50

User avatar
Abrax
Swoard team
Swoard team
Posts: 422
Joined: Sunday 25 November 2007, 19:12
Location: Cracow, Poland
Contact:

Re: ACSS - Advanced Carving Spring System for Deeluxe

Post by Abrax » Saturday 25 February 2012, 18:01

For ACSS for Heads or UPZ's please ask Arnaud
www.carvingskills.com
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!

User avatar
bino
Rank 5
Rank 5
Posts: 260
Joined: Wednesday 30 April 2008, 23:12
Location: France, paris (idf 94)

Re: ACSS - Advanced Carving Spring System for Deeluxe

Post by bino » Saturday 3 March 2012, 19:18

hi abrax, i send you a PM :wink:
deeluxe track 325 + intec + ACSS
hot plus 162
Swoard 168H

keepTheSport
Rank 5
Rank 5
Posts: 200
Joined: Saturday 18 February 2012, 15:15

Re: ACSS - Advanced Carving Spring System for Deeluxe

Post by keepTheSport » Sunday 4 March 2012, 19:47

Tomba wrote:My acss arrived & mounted.

Custom color combination looks great - thanks Rafal :wink:
Hey, Abrax's ACSS springs with the custom colour, look really great on the boot :clap3:

PS Sorry didn't know how to bring the picture of the boots forward into this quote.
Such fun-gr!
One more try-bk!

Locked