Hi EC'ers,
What is the best way to get the old spring system bolt out of the plastic? Without destroying the plastic?
Seen the video where a few taps with the hammer seem to get it out, but mine seem to have a small plastic lip that prevents them coming out. I even tried the big hammer.
Any ideas?
cheers,
Slayer
UPZ RC10 Struggling to get the spring system out
Moderators: fivat, rilliet, Arnaud, nils
UPZ RC10 Struggling to get the spring system out
Soft: Dual 175, Burton Driver-X, Flux CV
Hard: Gen4 175M, UPZ RC10, F2 Race Titanium
Hard: Gen4 175M, UPZ RC10, F2 Race Titanium
Re: UPZ RC10 Struggling to get the spring system out
Hi Slayer watch my video on italian forum with title: video smontaggio sistema molle Upz
Coiler ECVC 168 Evo , Swoard EC Pro 168 M #00230# ,
Upz RC10+ DGSS ( by Drupi )
PHK 69,5
Upz RC10+ DGSS ( by Drupi )
PHK 69,5
Re: UPZ RC10 Struggling to get the spring system out
Hi Gio,
Thanks for that. I did try screwing the cylinder part all the way to compress the spring, but it didn't come out by hand pressure....not even hammer pressure. They must have changed something on the newer models.
I will try again, but I spent all last night tightening the spring, loosening the spring, nothing worked.
cheers,
Slayer
Thanks for that. I did try screwing the cylinder part all the way to compress the spring, but it didn't come out by hand pressure....not even hammer pressure. They must have changed something on the newer models.
I will try again, but I spent all last night tightening the spring, loosening the spring, nothing worked.
cheers,
Slayer
Soft: Dual 175, Burton Driver-X, Flux CV
Hard: Gen4 175M, UPZ RC10, F2 Race Titanium
Hard: Gen4 175M, UPZ RC10, F2 Race Titanium
Re: UPZ RC10 Struggling to get the spring system out
Just put on a big screwdriver on the big screw just right behind the top, it must come out and then push a little on the end of the screw by hand. Put a picture on this topic of your problem, may be we can help you out. I had boots from 2 seasons back and this years model and fixed it within 20 seconds.
Re: UPZ RC10 Struggling to get the spring system out
Coiler ECVC 168 Evo , Swoard EC Pro 168 M #00230# ,
Upz RC10+ DGSS ( by Drupi )
PHK 69,5
Upz RC10+ DGSS ( by Drupi )
PHK 69,5
Re: UPZ RC10 Struggling to get the spring system out
Thanks for the replies. I did get them out eventually, but it was not easy.
cheers,
Slayer
cheers,
Slayer
Soft: Dual 175, Burton Driver-X, Flux CV
Hard: Gen4 175M, UPZ RC10, F2 Race Titanium
Hard: Gen4 175M, UPZ RC10, F2 Race Titanium