Trench Digger 3

Post by **Hans** » Wednesday 7 January 2009, 10:41

Schneewurm wrote:... I always am locked in, also in the lifts ...
Thats great, so anyone knows at one short view - a tourist is comming.
So lifts like them, where I saw this warning (see photo), withe icy, rutted tracks would not be good for You!

Glad you like the tourists, because otherwise it would be quiet empty in your home country. Swzitzerland is still a very beautiful country but too f....g expensive for a family holiday. Or do you know places to stay for a decent price??

By the way no probs here with rutted and icy pists

, I noticed that with my both feet locked in it cost me less energy to make use of the towlift.

Post by **Skwalleur** » Tuesday 13 January 2009, 23:00

Just as expected - looks fantastic!

Post by **nils** » Tuesday 13 January 2009, 23:07

cant wait to get mine

should arrive in a few days too

Nils

Post by **The Blitz** » Wednesday 14 January 2009, 9:15

Skwalleur wrote:Just as expected - looks fantastic!

XXXX-Wide wood board !

Post by **Skwalleur** » Wednesday 14 January 2009, 19:08

The Blitz wrote:
Skwalleur wrote:Just as expected - looks fantastic!
XXXX-Wide wood board !

21cm waist is wide for me...

Post by **tommaso2k** » Saturday 17 January 2009, 19:05

Has anyone tested the TD3 now and could post a quick review please?

Thanks
Thomas

Post by **starikashka** » Saturday 17 January 2009, 21:12

Skwalleur wrote:Just as expected - looks fantastic!

Am i correct - the intec block looks borrowed from F2 intec binding?

Post by **Skwalleur** » Monday 19 January 2009, 13:21

No they are now in steel and no longer aluminum.
Works fantastic.
I just switched from using titaniums and titanflexes, and first impressions are really good.

Post by **snovvman** » Sunday 29 March 2009, 18:40

Schneewurm wrote:If You like to stand 5-6 mm higher then F2-Titanium's, or about 16 mm higher then a high-end low profile binding, it would be o.k.

That is one thing that I do not like is standing so high from the board. That is what's keeping me from jumping to get the TD3.

How does the height of TD3 compare to Catek's OS2 with D3?

What are these "high-end" low profile bindings you refer? Please point the way.

Thanks.

Post by **Petra1986** » Saturday 18 April 2009, 2:16

Skwalleur wrote:Just as expected - looks fantastic!

are they skwall setup?
is td3 skw setup available?

tnx

Post by **Hans** » Saturday 18 April 2009, 9:45

Yes, the skwal setup is available, standard is sold out till november 2009:
http://www.bomberonline.com/store/bindings/skwal.cfm

Also sold out with POGO but the stepin version is still available:
http://www.pogo.biz/shop/index.php?cPat ... 3a0ef15f4f

I just modified my TD3 stepins so they would fit my Cyborg EVO Titanal.

Post by **Petra1986** » Saturday 18 April 2009, 17:07

Hans wrote:Yes, the skwal setup is available, standard is sold out till november 2009:
http://www.bomberonline.com/store/bindings/skwal.cfm

whhhaaaaat?? november?? .. so i have to hurry if i don't want to miss 'em..

Hans wrote:I just modified my TD3 stepins so they would fit my Cyborg EVO Titanal.

modified? by yourself or you ordered the setup too? how do you feel them on your baby?

tnx Hans, very helpful.

will you be @CM 09?

Post by **Hans** » Saturday 18 April 2009, 17:37

I modified the TD3 Ering (elastomere) and the cantdisk a little so they would fit the width of the Cyborg. I just tried them on a 'normal' Cyborg titanal and they work like a charm. I also made a 2mm rubber gasket under the binding because I don't like the metal centerdisk mounted directly on the titanal. This board is really a blast.

Yes, I will be at the CM2009. You can find me at the list Silverpass number 6: http://www.carving-masters.de/teilnehmer.html

Hope you are there too, there will be many Cyborgriders there, so we can catch up and learn from each other, that would be nice. I will be arriving at fridayevening. At friday I first will take aonther glacier: stubai. Will also be monday on that stubai glacier because Soelden will be closed then.

For more info, I have send you a PM.

Post by **Petra1986** » Sunday 19 April 2009, 8:58

Hans wrote:I modified the TD3 Ering (elastomere) and the cantdisk a little so they would fit the width of the Cyborg. I just tried them on a 'normal' Cyborg titanal and they work like a charm. I also made a 2mm rubber gasket under the binding because I don't like the metal centerdisk mounted directly on the titanal. This board is really a blast.

very interesting..would be great to see some pics..

Hans wrote:Yes, I will be at the CM2009. You can find me at the list Silverpass number 6: http://www.carving-masters.de/teilnehmer.html

Hope you are there too, there will be many Cyborgriders there, so we can catch up and learn from each other, that would be nice. I will be arriving at fridayevening. At friday I first will take aonther glacier: stubai. Will also be monday on that stubai glacier because Soelden will be closed then.

For more info, I have send you a PM.

I will be there too, for the first time, with a couple of friends.
I'm sure we'll have a great time.
can't wait for may to come!

Post by **leeho730** » Thursday 19 November 2009, 16:41

I love the toe clips.

And both toe and heel blocks have hard stops, so they're not floppy anymore. And toe clips won't go over the edge and get jammed.

I was lucky enough to secure some titanium heel bails (before Fin stopped making these). Fits perfectly.

TD3 is such an awesome product... Can't wait to try this on the snow

ExtremeCarving FORUM

Trench Digger 3

Tourists

wow

Skwal setup

Re: Skwal setup

Re: Skwal setup

Re: Skwal setup

TD3 toe bail