ACSS - Advanced Carving Spring System for Deeluxe
Moderators: fivat, rilliet, Arnaud, nils
Re: ACSS - Advanced Carving Spring System for Deeluxe
Hello Abrax
I'm impressed about your job with your ACSS. It's time for my comeback on the edge. (We're still alive)
You have got a PM with my order but the PM is still in my outbox...very strange
Please let me know if you have my order.
Thanks in advance.
Christoph
I'm impressed about your job with your ACSS. It's time for my comeback on the edge. (We're still alive)
You have got a PM with my order but the PM is still in my outbox...very strange
Please let me know if you have my order.
Thanks in advance.
Christoph
Bigboards - Burton Race Plate - Deeluxe Indy - AirG Emilie Peace - Montesa Repsol
- Abrax
- Swoard team
- Posts: 422
- Joined: Sunday 25 November 2007, 19:12
- Location: Cracow, Poland
- Contact:
Re: ACSS - Advanced Carving Spring System for Deeluxe
Hi Scope, Yes I have received your order today at 1:20 AM so everything is fine.
Forum keeps it in your outbox and this allows you to edit the message till it is read. Once I read it you can't edit it anymore
Forum keeps it in your outbox and this allows you to edit the message till it is read. Once I read it you can't edit it anymore
www.carvingskills.com
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!
- fmasoni3
- Rank 3
- Posts: 25
- Joined: Monday 23 September 2013, 16:38
- Location: Santa Croce sull'Arno (PI)
Re: ACSS - Advanced Carving Spring System for Deeluxe
Hi Abrax, you have a PM from me
f2 eq sl 163 - f2 rt - deeluxe 700
-
- Rank 3
- Posts: 24
- Joined: Saturday 26 March 2011, 15:11
- Location: Russia, Saint-Petersburg
- Contact:
Re: ACSS - Advanced Carving Spring System for Deeluxe
ACSS works perfect with my Deeluxe 225
Soft-boot carving project www.FunCarve.com
Extremecarving lessons www.youtube.com/user/FunCarve2012
Extremecarving lessons www.youtube.com/user/FunCarve2012
Re: ACSS - Advanced Carving Spring System for Deeluxe
Abrax, i send you a PM 2 days ago.
No post from you since 2013. Are you alive ???
No post from you since 2013. Are you alive ???
- Abrax
- Swoard team
- Posts: 422
- Joined: Sunday 25 November 2007, 19:12
- Location: Cracow, Poland
- Contact:
Re: ACSS - Advanced Carving Spring System for Deeluxe
Yeap, big changes in my life But I am here and I'm gonna reply to everyone right after I will get some sleep Finally... Dudes, thanks for waiting and understanding...
www.carvingskills.com
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!
Re: ACSS - Advanced Carving Spring System for Deeluxe
Abrax wrote:Yeap, big changes in my life But I am here and I'm gonna reply to everyone right after I will get some sleep Finally... Dudes, thanks for waiting and understanding...
Re: ACSS - Advanced Carving Spring System for Deeluxe
On Deeluxe Track 325, how are you supposed to remove the 2 bolts (step #1)? Tried grabbing with some pliers and rotating but there is not much to grab... especially on the lower one.
- christian61
- Rank 5
- Posts: 317
- Joined: Friday 17 November 2006, 19:40
- Location: Northern Bavaria, Germany
Re: ACSS - Advanced Carving Spring System for Deeluxe
No pliers! Use a screw like this (a little bit thinnner than the bolt)varis wrote:On Deeluxe Track 325, how are you supposed to remove the 2 bolts (step #1)? Tried grabbing with some pliers and rotating but there is not much to grab... especially on the lower one.
http://www.paulwiegand.de/idoc/images/S ... 171045.jpg
and a hammer to drive the bolt out. It takes some force, but be careful to drive it out in the right direction, as shown in picture 1 at the beginning of this thread.
SWOARD EXTREMECARVER GEN4 168s + 161m, Deeluxe 225 + ACSS
- Abrax
- Swoard team
- Posts: 422
- Joined: Sunday 25 November 2007, 19:12
- Location: Cracow, Poland
- Contact:
Re: ACSS - Advanced Carving Spring System for Deeluxe
You should take 5mm or a bit thinner bolt and try to punch the bolts out with the additional one with a hammer.
Once it goes out 3-4 mm check if there is a rough surface comming out. If not, please punch the bolt in the oposite direction.
ACSS guys -> I thought it will be easier. It's not. I will do my best to reply all the e-mails (thank you! ) at last on Sunday!
Once it goes out 3-4 mm check if there is a rough surface comming out. If not, please punch the bolt in the oposite direction.
ACSS guys -> I thought it will be easier. It's not. I will do my best to reply all the e-mails (thank you! ) at last on Sunday!
www.carvingskills.com
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!
-
- Rank 3
- Posts: 24
- Joined: Saturday 26 March 2011, 15:11
- Location: Russia, Saint-Petersburg
- Contact:
Re: ACSS - Advanced Carving Spring System for Deeluxe
Abrax is a dad now )
Congrats!x!
Congrats!x!
Soft-boot carving project www.FunCarve.com
Extremecarving lessons www.youtube.com/user/FunCarve2012
Extremecarving lessons www.youtube.com/user/FunCarve2012
- nextcarve
- Rank 5
- Posts: 109
- Joined: Tuesday 22 January 2013, 22:25
- Location: Berner Oberland
- Contact:
Re: ACSS is Dangerous
After I received my ACSS, I put it on my Deeluxe 325. Next day I went on the slope to try it out. The conditions were a mixture of soft and hard snow.
And it came like it had to come. In a soft part my snowboard just dug into the snow and was stopped abruptly by a hard spot. I was just catapulted to the front.
Unfortunately the ACSS has no limit for overbending. My ankle joint was compressed hard and my calf was overstretched to the limit.
I hurt myself very badly!
I don't want to give ACSS and its builder a bad reputation, but it has a serious safety problem and you risk to get injured.
Perhaps after my feedback abrax thinks of changing the design in a way ACSS limits dangerous overstretching.
After this accident the season 2013/14 has ended for me, because I will not recover fast enough
And it came like it had to come. In a soft part my snowboard just dug into the snow and was stopped abruptly by a hard spot. I was just catapulted to the front.
Unfortunately the ACSS has no limit for overbending. My ankle joint was compressed hard and my calf was overstretched to the limit.
I hurt myself very badly!
I don't want to give ACSS and its builder a bad reputation, but it has a serious safety problem and you risk to get injured.
Perhaps after my feedback abrax thinks of changing the design in a way ACSS limits dangerous overstretching.
After this accident the season 2013/14 has ended for me, because I will not recover fast enough
MOON & CARVE: The Raceboard Event, Elsigen-Metsch, CH.
http://www.moon-and-carve.com
http://www.moon-and-carve.com
-
- Rank 3
- Posts: 24
- Joined: Saturday 26 March 2011, 15:11
- Location: Russia, Saint-Petersburg
- Contact:
Re: ACSS - Advanced Carving Spring System for Deeluxe
Hi!
It's very pity..
Extremecarving is dangerous sport..it's extreme.
And your mistakes can be fatal. I think nose-dive can occure this injure with any boot's system.
It's very pity..
Extremecarving is dangerous sport..it's extreme.
And your mistakes can be fatal. I think nose-dive can occure this injure with any boot's system.
Soft-boot carving project www.FunCarve.com
Extremecarving lessons www.youtube.com/user/FunCarve2012
Extremecarving lessons www.youtube.com/user/FunCarve2012