ACSS - Advanced Carving Spring System for Deeluxe

[Fefe]

Merry Xmas

Rafal, comparing with your video of flexing a Deeluxe track 335, how far goes your old raichle's forward flex? On mine, I'm not flexing that much.

The 1st time I read about your mod on old raichle boots, I was already in the ski resort with no tool, so I only unlocked the lower fastener (2nd from the top, right?). I could get some more flex but not as much as that of track 325.

Fefe

[Abrax]

My Raichles are seriously cut. The mod has taken about 3 hours and I have moved lower fastener about 2,5cm upwards. I have to make some photos. The flex is very big. I mean not different from what I had in my INDY's .

Pics soon...

[Fefe]

Thanks, looking forward to them

Long works ahead but I have time, carving season is over for me I have a year to prepare the boots

I was re-reading the thread and was interested by Sorro's posts and works on his old boots. I'll compare your works and his and see which one i can reproduce with my little DIY skills

I also noticed Mirek's video, quite an impressive forward flex, but when comparing with my boots, I saw that the canting setup was different. It seems that Mirek's setup is high while mine is low (the round part is close to the cable buckle, less forward flex I suppose)

Anyway, at least I can explore different ways to increase the flex

[Christian_K]

@Abrax: I'm interested in ordering a ACSS set. Please look in your inbox. You have a pm from me. Thank you very much.

Christian

[Abrax]

Christian, I'm afraid that nothing can be seen in my mailbox. Please send me an e-mail to abrax@swoard.com

[secarrier]

Hi Raf.
Got my new ACSS installed last week end on Deeluxe 325, tested yesterday. No mod for now.
Man, your ACSS system really really rocks!
I was riding an old Burton Alp (1998) and was now easily able to get a low and stable carving (usually quite tough to achieve on this very rigid board).
The biggest benefit for me was the radically improved stability of the carve on rough snow and much less fatigue in the legs.


Serge

[Dmitry]

how to place an order for ACCS? plan to take in Zinal. For UPZ RC10

[csboros]

another buyer here, please check your mailbox Abrax

[frederic75000]

I'd like too
Abrax, I sent you 2 email at abrax@swoard.com (last friday the first one) and no answer yet.
Thank you

[bebert33]

Abrax: I'm interested in ordering a ACSS set. Please look in your inbox. You have a pm from me. Thank you very much.

Michel

[Abrax]

Hello guys, I'm alive again. Tomorrow I will write you back Sorry for the delays.

[csboros]

Hi Abrax,
No replies here yet - so do you think we can arrange a purchase or should I go with BTS? Worse or not I'd like a system for the season.

Thanks!

[Abrax]

Hi guys, currently there are some 2010 - non galvanized systems in stock. Colored should be available in a week after the ECS.

Price is still 55 euro shipped. Nothing has changed.

Springs: Actually I am testing 3 sets of stiffer springs.
1: a set commonly known
2: 2x stiffer springs, PASSES TESTS
3. 3x stiffer springs. (UNDER INVESTIGATION)

Info about the springs will be posted here after the ECS.

[Abrax]

Guys,

Dmitri: I've sent you an e-mail with a contact to Arnaud, hope you did contact him?

Csaba, Michel, Frederic, Rastaman: PM's sent!

Sorry for keeping you waiting. Local problems here.

secarrier: WOW - thank you for your kind words! I'm glad you like them!

Regards,
Rafal

[frederic75000]

Hi Abrax,

I sent you my payment the 20th of january by Paypal and I have not yet received my order.
I sent you several messages to your e-mail (abrax@swoard.com) and PM, but received no answers neither.

Please, give me some news !