[BOOKED] Extremecarver GEN IV 168S NEW ++> PRICE DROP

Sell or buy / Vendre ou acheter / Vendere o comprare / Kaufen oder Verkaufen

Moderators: fivat, rilliet, tali, Arnaud, nils, joemzl, Petr, Silber, Alex

Post Reply
User avatar
Abrax
Swoard team
Swoard team
Posts: 422
Joined: Sunday 25 November 2007, 19:12
Location: Cracow, Poland
Contact:

[BOOKED] Extremecarver GEN IV 168S NEW ++> PRICE DROP

Post by Abrax » Monday 2 December 2019, 21:53

Hello carver,

Extremecarver GEN IV 168S NEW

CONDITION: This is a brand new board I have bought few years ago to support my ExtremeCarving school :-)

However this particular one has never seen the snow. It is perfect, factory condition board. You may even see a sticker on it.

THE PRICE: 400 EURO =>> 350 EURO / 400 shipped in EU ==>> 300 euro / 350 shipped in europe.

Please consider that this board is sold as a private board - no warranty, no invoice. These are the only boards I have left and I won't need them anymore :-)

Shipping in europe -> possible, I may check the specific destination price for you. (UPS, DHL or GLS) Few years ago I used to ship for 45-55 euro.

Photos of all the sale boards -> the board 168S is the bottom one :
sale_SAM_1768.jpg
sale_SAM_1773.jpg
sale_SAM_1769.jpg
www.carvingskills.com
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!

User avatar
Abrax
Swoard team
Swoard team
Posts: 422
Joined: Sunday 25 November 2007, 19:12
Location: Cracow, Poland
Contact:

Re: [FOR SALE] Extremecarver GEN IV 168S NEW

Post by Abrax » Monday 9 December 2019, 18:02

Up :-)
www.carvingskills.com
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!

Stansmith2b
Rank 1
Rank 1
Posts: 8
Joined: Saturday 14 December 2019, 21:20

Re: [FOR SALE] Extremecarver GEN IV 168S NEW

Post by Stansmith2b » Sunday 15 December 2019, 11:24

still available ?
Je penche donc je suis ..... ( enfin j'essaye)

User avatar
Abrax
Swoard team
Swoard team
Posts: 422
Joined: Sunday 25 November 2007, 19:12
Location: Cracow, Poland
Contact:

Re: [FOR SALE] Extremecarver GEN IV 168S NEW

Post by Abrax » Sunday 15 December 2019, 19:36

Yes, still available, however 2 persons asked on priv. :)
www.carvingskills.com
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!

User avatar
Abrax
Swoard team
Swoard team
Posts: 422
Joined: Sunday 25 November 2007, 19:12
Location: Cracow, Poland
Contact:

Re: [FOR SALE] Extremecarver GEN IV 168S NEW

Post by Abrax » Monday 16 December 2019, 0:09

Guys, this one is 168S :-)

It will fit a person who is less than 70kg and not taller than 182cm.

FYI I personally ride a board which is a bit overweighted, I like this softer feeling and it helps me a lot in icy conditions. Thats why I say less than 70kg, when the board was meant for somebody below 68kg.
www.carvingskills.com
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!

User avatar
Abrax
Swoard team
Swoard team
Posts: 422
Joined: Sunday 25 November 2007, 19:12
Location: Cracow, Poland
Contact:

Re: [FOR SALE] Extremecarver GEN IV 168S NEW ++> PRICE DROP

Post by Abrax » Thursday 26 December 2019, 11:21

UP!

Price Drop ! :)
www.carvingskills.com
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!

User avatar
notrub
Rank 4
Rank 4
Posts: 76
Joined: Saturday 5 January 2008, 9:13
Location: Cairate VA

Re: [FOR SALE] Extremecarver GEN IV 168S NEW ++> PRICE DROP

Post by notrub » Thursday 26 December 2019, 13:59

And what about the other boards? Are them on sale. I'm looking for 168h. Thanks for answer. Wishes.

User avatar
Abrax
Swoard team
Swoard team
Posts: 422
Joined: Sunday 25 November 2007, 19:12
Location: Cracow, Poland
Contact:

Re: [FOR SALE] Extremecarver GEN IV 168S NEW ++> PRICE DROP

Post by Abrax » Monday 13 January 2020, 10:04

All the other boards were sold. Just the 168S is still available. BTW - Price dropped once again.
www.carvingskills.com
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!

Fred07
Rank 3
Rank 3
Posts: 32
Joined: Saturday 22 February 2014, 21:30
Location: Toulaud (07)

Re: [FOR SALE] Extremecarver GEN IV 168S NEW ++> PRICE DROP

Post by Fred07 » Monday 13 January 2020, 11:29

Hi Rafal,
I sent you a message
Fred.
EC 168S Gen4 / Snowpro / Raichle 323
Jones Hovercraft / SP Fastec mountain / Burton Driver X

Fred07
Rank 3
Rank 3
Posts: 32
Joined: Saturday 22 February 2014, 21:30
Location: Toulaud (07)

Re: [FOR SALE] Extremecarver GEN IV 168S NEW ++> PRICE DROP

Post by Fred07 » Monday 13 January 2020, 22:44

Hi Rafal,
Sorry but the message that i try to send to you stay in my "sent box" :huh:
I'm really interested by your 168S because I'm to light for my 168M...
How can we do for the deal ?
Many thanx
Fred
EC 168S Gen4 / Snowpro / Raichle 323
Jones Hovercraft / SP Fastec mountain / Burton Driver X

User avatar
Wouter
Rank 4
Rank 4
Posts: 85
Joined: Tuesday 11 January 2011, 23:22
Location: Madrid

Re: [FOR SALE] Extremecarver GEN IV 168S NEW ++> PRICE DROP

Post by Wouter » Wednesday 15 January 2020, 22:40

Hi Fred. I might be interested in your 168M. What Gen? How long do you have it? What use has it got? Thanks.
Swoard 168 H - Gen 3
RAD 173
Volkl 175 Skwal
F2 Speedster
F2 Respect

Fred07
Rank 3
Rank 3
Posts: 32
Joined: Saturday 22 February 2014, 21:30
Location: Toulaud (07)

Re: [FOR SALE] Extremecarver GEN IV 168S NEW ++> PRICE DROP

Post by Fred07 » Thursday 16 January 2020, 8:37

Hi Wouter,
i sent you a PM.

Fred.
EC 168S Gen4 / Snowpro / Raichle 323
Jones Hovercraft / SP Fastec mountain / Burton Driver X

User avatar
Abrax
Swoard team
Swoard team
Posts: 422
Joined: Sunday 25 November 2007, 19:12
Location: Cracow, Poland
Contact:

Re: [FOR SALE] Extremecarver GEN IV 168S NEW ++> PRICE DROP

Post by Abrax » Friday 17 January 2020, 10:41

Hi Fred,

I have sent you a PM,

Sorry for the late reply.

R.
www.carvingskills.com
580km in 3 hours and 5 minutes completely legal!!! I love german highways!!!

Post Reply