[Sold] Burton Wind (practically new!) and Race Physics bind

Sell or buy / Vendre ou acheter / Vendere o comprare / Kaufen oder Verkaufen

Moderators: fivat, rilliet, tali, Arnaud, nils, joemzl, Petr, Silber, Alex

Locked
User avatar
WinterGold
Rank 5
Rank 5
Posts: 249
Joined: Tuesday 10 November 2009, 17:55
Location: Austria

[Sold] Burton Wind (practically new!) and Race Physics bind

Post by WinterGold » Sunday 29 November 2015, 15:02

Hello carving community!
I am selling a set of Burton Wind hardboots and Burton Race Physics bindings.
The boots are size 27.5 (42.5).
They are practically new - only a few hours on snow as you can see in the pictures.

The bindings are used for 2 seasons, but they are also in very good conditions.

As the site wants me to indicate a price, I ask 450€ for the set.
But if you are really interested in the set please send me a PM! I have a lot more stuff from this series - Fire boots (very small crack in one tongue - easy to fix - or can be used for spare parts for the Wind!), very rare Race Physics bindings with carbon baseplate!!!, loads of spare parts which are all new! (sole adapters, front bails for the Race Physics for other hardboots, etc.). I can send pictures if you like.
__________________

Wie oben beschrieben verkaufe ich ein Set Burton Wind Hardboots plus Burton Race Physics Bindungen. Bei ernsthaftem Interesse einfach bei mir melden. Ich habe sehr viele weitere Teile. Vieles davon noch in Originalverpackung und unbenutzt. Habe auch eine extrem seltene Race Physics Bindung mit Carbon Grundplatte (für die Teamfahrer).
__________________
Attachments
Bindings.jpg
Bindings.jpg (107.39 KiB) Viewed 4972 times
Wind.jpg
Wind.jpg (156.06 KiB) Viewed 4972 times
Wind2.jpg
Wind2.jpg (129.81 KiB) Viewed 4972 times

DAN
Rank 1
Rank 1
Posts: 5
Joined: Tuesday 8 December 2015, 12:28

Re: Burton Wind (practically new!) and Race Physics bindings

Post by DAN » Tuesday 8 December 2015, 12:58

Hello WinterGold
ich habe Deine Anzeige gelesen und interessiere mich für Dein Burton Material. Was hast Du sonst noch so an Burtonteilen anzubieten? Da mir Burton am besten passt habe ich einige Fire und Wind Schuhe und bin immer auf der Suche nach Ersatzmaterial. Kannst Du mir bei Gelegenheit angeben ob bei Deinen Schuhen auf der Innenschale seitlich 27.5 - 28 steht (27.5 - 29 ist mir zu gross). Hast Du ev. auch noch Reservefersenadapter zu den Burton Physics ?
bis dann
DAN

User avatar
WinterGold
Rank 5
Rank 5
Posts: 249
Joined: Tuesday 10 November 2009, 17:55
Location: Austria

Re: Burton Wind (practically new!) and Race Physics bindings

Post by WinterGold » Tuesday 8 December 2015, 17:15

Hallo DAN!
Meine Schuhe sind beide 27.5. Das bedeutet das der Unterteil immer 27.5-28.0 ist! Die Zunge und der Schaft haben einen größeren Bereich - da steht 27.5-29.0. Das ist immer so ...
Der Wind ist wie auf dem Foto zu sehen neuwertig. Ich habe noch einen gelb durchsichtigen Fire. Dieser Schuh ist in einem sehr guten Zustand und auch ein Physics Adapter montiert - ebenfalls noch sehr gut erhalten! Der Fire hat in einer Zunge eine kleinen Riss - ist mir erst vor kurzem aufgefallen. Das lässt sich aber leicht reparieren, wenn man sich damit auskennt bzw. ist der Schuh super für Ersatzteile.

Ich habe auch noch ein drittes Paar Physics Adapter, aber die sind aus der ersten Serie (dünnere Aufnahmen) und schon ziemlich abgenützt, aber auch noch voll funktionsfähig!

Ich habe sehr viele Ersatzteile da - Sohlenadapter für Wind, Fire - Ersatzteile für die Race Physics - Ersatzgriffe für die Kabel - etc.

Ich habe auch eine "Team Edition" von der Race Physics da - die Grundplatte ist aus Carbon! - super Teil!!!

Insgesamt habe ich 3 Race Physics Bindungen, aber die 3. Bindung ist auch eher für Ersatzteile, weil sie aus der ersten Serie ist und die Zapfen etwas anders geformt. Aber sie hat eine coole gelbe Grundplatte (war nie in Serie!) ;-).

Wenn du mir eine email Adresse schickst (per PN oder hier), kann ich dir noch Fotos schicken.

Natürlich würde ich dir einen Top Paket Preis machen, wenn du alles nimmst!!! Würde mich ja riesig freuen, wenn es jemand bekommt, der es zu schätzen weiss! Bei mir liegt es schon seit Jahren herum. Ich will es immer aktivieren, aber ich komme nie dazu. Habe so viel anderen Krempel ...

DAN
Rank 1
Rank 1
Posts: 5
Joined: Tuesday 8 December 2015, 12:28

Re: Burton Wind (practically new!) and Race Physics bindings

Post by DAN » Tuesday 8 December 2015, 18:12

Danke, ich habe Dir eine PN gesandt

ah100m56
Rank 0
Rank 0
Posts: 1
Joined: Thursday 17 November 2016, 16:00

Re: Burton Wind (practically new!) and Race Physics bindings

Post by ah100m56 » Thursday 17 November 2016, 16:15

Hello
I cam across your post as I am looking for a pair of toe plates either new or used and in very good condition for a Burton Fire boot for the Race Physics Binding. I don't need the metal clamp. I should think that this is the same as it used to be used on the Burton Wind boot.

Should you have a pair or know of someone who has, please let me know.

Best regards, PHK

Hallo
I habe eben Deinen Post gelesen und mir gedacht Du könntest möglicherweise ein Paar Ersatzplatten für den Zehenbereich (entweder neu oder in sehr gutem Zustand) des Burton Fire Boots für die Race Physics Bindung. Den Metallbügel benötige ich nicht. Ich denke das Ist dasselbe teil wie es beim Wind verwendet wurde.

Solltest Du ein Paar dieser Platten haben oder jemanden weisst der sie hat, lass es mich bitte wissen.

Vielen Dank. PHK

User avatar
WinterGold
Rank 5
Rank 5
Posts: 249
Joined: Tuesday 10 November 2009, 17:55
Location: Austria

Re: Burton Wind (practically new!) and Race Physics bindings

Post by WinterGold » Friday 18 November 2016, 20:25

Do you mean the toe blocks of the boots? I am sorry, but I don´t have spare ones :(

I do have the toe blocks of the binding for normal hardboots, but I guess this is not what you are looking for ...

Locked