[Sold] Extremecarver 168XH #503 (Gen3) - 300 eur
Moderators: fivat, rilliet, tali, Arnaud, nils, joemzl, Petr, Silber, Alex
[Sold] Extremecarver 168XH #503 (Gen3) - 300 eur
Selling one of the old boards.
Bought in 2010, used for 1.5 seasons. Then lost some weight and switched to a softer flex.
Was properly stored all the time, waxed and all.
Can make more pictures if there's interest.
Bought in 2010, used for 1.5 seasons. Then lost some weight and switched to a softer flex.
Was properly stored all the time, waxed and all.
Can make more pictures if there's interest.
- Attachments
-
- swoard.jpg (17.41 KiB) Viewed 6417 times
Re: Extremecarver 168XH #503 (Gen3) - 350 eur
Hi How much for shipping ? Regards matteo.
Re: Extremecarver 168XH #503 (Gen3) - 350 eur
Where to?matteotom wrote:Hi How much for shipping ? Regards matteo.
Re: Extremecarver 168XH #503 (Gen3) - 300 eur
The price goes down to 300 eur.
Re: Extremecarver 168XH #503 (Gen3) - 300 eur
Very interested. Would you consider shipping to the USA? Zip code 53711 (Madison, Wisconsin)
Re: Extremecarver 168XH #503 (Gen3) - 300 eur
Sure, post.ch tells me it's going to cost around $73 -- let me know if you're OK with that.nelsdvn wrote:Very interested. Would you consider shipping to the USA? Zip code 53711 (Madison, Wisconsin)
Re: Extremecarver 168XH #503 (Gen3) - 300 eur
Alternatively, I'm travelling to San Francisco early March and can take the board with me and ship from there, which I guess, would be a little cheaper, but it's almost three months away :-/qowah wrote:Sure, post.ch tells me it's going to cost around $73 -- let me know if you're OK with that.nelsdvn wrote:Very interested. Would you consider shipping to the USA? Zip code 53711 (Madison, Wisconsin)
Re: Extremecarver 168XH #503 (Gen3) - 300 eur
Thanks for the reply. That seems like a reasonable shipping cost. The only thing I am debating is according to the Swoard guide I should ride a 175H (185.5cm 88kg MP28.5) so I am trying to rationalize that a 168XH would be close enough...
-
- Rank 1
- Posts: 5
- Joined: Monday 5 January 2015, 8:57
Re: Extremecarver 168XH #503 (Gen3) - 300 eur
Hi
Verry interested by your board ! Need shipping to the south of France!
Let me know if the board is still available , and how we can finalize the transaction !
Is there a phone number were you can be reached?
Best regards!
Verry interested by your board ! Need shipping to the south of France!
Let me know if the board is still available , and how we can finalize the transaction !
Is there a phone number were you can be reached?
Best regards!
Re: Extremecarver 168XH #503 (Gen3) - 300 eur
Ah, it's a tough one, I had to choose between these two as well when I was buying this board I went with 168XH as I am a bit shorter and was also heaviernelsdvn wrote:Thanks for the reply. That seems like a reasonable shipping cost. The only thing I am debating is according to the Swoard guide I should ride a 175H (185.5cm 88kg MP28.5) so I am trying to rationalize that a 168XH would be close enough...
Well, let me know once you've made the decision.
Re: Extremecarver 168XH #503 (Gen3) - 300 eur
Hi, ironically I am snowboarding in Val d'Iser this week but I didn't take the 168XH with me, so will only be able to ship once I'm back to Zurich (next week). I'll send you my phone # in private (but again, it's off until next week, Swiss roaming charges are insane).thefalcons wrote:Hi
Verry interested by your board ! Need shipping to the south of France!
Let me know if the board is still available , and how we can finalize the transaction !
Is there a phone number were you can be reached?
Best regards!
Judging on what post.ch tells me, shipping to France will be 60 CHF, so around 50 EUR.
Re: Extremecarver 168XH #503 (Gen3) - 300 eur
This is sold now.