[SOLD] Virus Scalpel Premium 180

Sell or buy / Vendre ou acheter / Vendere o comprare / Kaufen oder Verkaufen

Moderators: fivat, rilliet, tali, Arnaud, nils, joemzl, Petr, Silber, Alex

Locked
GoFlo
Rank 1
Rank 1
Posts: 6
Joined: Thursday 21 October 2010, 18:05

[SOLD] Virus Scalpel Premium 180

Post by GoFlo » Thursday 21 October 2010, 18:07

Hi zusammen,

verkaufe mein Virus Scalpel Premium 180. Hab das Board im November 2009 getestet und gekauft, somit 1 Jahr auf dem Buckel. Das Brett hat gerade einen frischen Service bei Virus bekommen, somit Belag top, Kanten auch.

Was hats an Mängeln... ein kleines Stück Topsheet (ca 10x10mm) vorne an der Nose fehlt, ein paar Kratzer zwischen den Bindungen (vom Boot beim Schleppliften) und einen Kratzer an der Nose wo mir mal ein 5-Teiler drauf ist. Ansonsten top in Schuss. Preislich wären 550€ angesetzt.

Gruss Flo


--------------------------------------

Hi everyone,
I´m selling my 2009 Virus Scalpel Premium (Bought 10/2009). Board got new service, Edges and Base are in very good condition. A piece of about 10x10mm of topsheet missing at the nose, some scratches between the bindings (boot during lifting) and a scratch at the nose from a skier. Price 550€
Attachments
base.JPG
base.JPG (134.75 KiB) Viewed 2421 times
top.JPG
top.JPG (118.26 KiB) Viewed 2550 times

GoFlo
Rank 1
Rank 1
Posts: 6
Joined: Thursday 21 October 2010, 18:05

Post by GoFlo » Wednesday 3 November 2010, 20:25

Still available.

GoFlo
Rank 1
Rank 1
Posts: 6
Joined: Thursday 21 October 2010, 18:05

Post by GoFlo » Sunday 28 November 2010, 11:23

Priceupdate: 550€

User avatar
alvin75
Rank 5
Rank 5
Posts: 307
Joined: Thursday 5 April 2007, 12:00
Location: Novara

Post by alvin75 » Wednesday 8 December 2010, 16:34

Hallo,
why on topsheet is wroten "X-Treme Carver Premium"?
Isn't a Scalpell, or am I wrong?!?

Ciao,
A.
Alvin75

Many boards, many emotions!

It's a HARD life!

GoFlo
Rank 1
Rank 1
Posts: 6
Joined: Thursday 21 October 2010, 18:05

Post by GoFlo » Wednesday 8 December 2010, 19:18

Hi Alvin,

you´re right with the print on the tail. It seemed to be a failure done in fabrication, that might be the reason it started its life as a testboard on that weekend in Sölden, where I bought it from Virus directly.

The signature on the mid of the board where also the serial number is written says Scalpel instead. It´s just the wrong topsheet-printing, the board itself is a Scalpel Premium 180.

Best regards
Flo

GoFlo
Rank 1
Rank 1
Posts: 6
Joined: Thursday 21 October 2010, 18:05

Post by GoFlo » Monday 27 December 2010, 23:11

Board is still available.

Locked