Swoard Gen 5 Bindungseinstellung

Beiträge zu den Themen SWOARD Snowboards, Extremecarving Fahrtechnik oder Dies und Das

Moderators: fivat, rilliet, nils, joemzl, Petr

Post Reply
Daniel_W
Rank 1
Rank 1
Posts: 9
Joined: Thursday 4 October 2018, 8:37
Location: Cham

Swoard Gen 5 Bindungseinstellung

Post by Daniel_W » Thursday 20 January 2022, 15:32

Hallo,
Ich würde gerne mal meine Bindung fürs Gen5 richtig einstellen. Ich bin 1,83m groß und wiege ca 78kg. Das Board hat 175cm flex M. Zunächst wäre mal interessant wie man die mitte der Kontaktlänge bestimmt, bzw. von wo man den Abstand zwischen den Bindungen misst.

LG
Daniel

User avatar
fivat
Swoard & EC founder
Swoard & EC founder
Posts: 3010
Joined: Thursday 21 March 2002, 13:13
Location: Geneva, Switzerland
Contact:

Re: Swoard Gen 5 Bindungseinstellung

Post by fivat » Friday 21 January 2022, 18:29

Hallo Daniel,

Get inspiration from this page. 8)

Recommended bindings angles for EC (with not too stiff hardboots in the ankles, and not too stiff bindings laterally): maximum 55°/47°.
Stance: as you are between Jacques and me, about 51 cm should be good for you.

Now see this subject. I copy the image below.

stance_setting.gif
stance_setting.gif (29.98 KiB) Viewed 2973 times

On your 175M, the inserts 3-4-7-8 give a stance of 52.6 cm. Place your bindings on these inserts. Then, with the elongated holes of your bindings, move your front binding about 8 mm backwards. Move your rear binding about 8 mm forward. So you get a stance of 51.0 cm, and your center of gravity is still at the same place, in the middle of the inserts. The board is designed for the rider to be centered like this.

Tschüss! :chinese:

Patrice Fivat

Post Reply