ExtremeCarving FORUM

@ harald yes, t's possible that the green spring is too soft, shorter and stronger ones are already in stock. But with the Indy boot, I don't see a problem with falling too far backwards, the boot doesn't go as far backwards as I would like anyway. @ The Blitz the drawings will come next week, I nee...

@ kelvin o I get the springs from Brütsch/Rüegger AG, a swiss shop, http://www.b-r.ch @ utzel this stuff around the orange boot is silicone, it's only fixed on the upper shell and seals the gap between upper and lower shell. In addition the gliding parts are treated with silicon spray, but this boot...

there are two reasons: on the pic the boot with the new system is a rear boot und the old is a front boot and I don't ride the same setup front / back. second if the buckles of the "old" are closed the RAB isn't at its end position anymore. and the "new" goes back as far as the "old", but spring con...

found a pic from side in normal position

thank you

non flexed is shown in SAB_3

I don't have real side pics at the moment, I'll try to do this,

Simon

pictures

Hello EC’ers, I spent a few hours on the milling machine and that's the result: a new RAB called SAB (Simon's Acceleration Box) The main part is made of aluminium and fixed on the boot with the standard pin and two additional screws, the part that holds the springs is screwed on and is on a differen...

Ja, die Barthélémy ist die EC Piste. Wobei die Piste von le Col herunter auch ganz gut ist.

Simon

F2 Race Titanium works fine with a Deeluxe Indy boot with intec heels. The pins don't have any contact to the binding. I ride this setup and like it on the swoard. On other boards I prefere the stiffer intec titanium.

Simon

The bumpers give some flexibility, but in all directions. you only need the flex sideways. I didn't rode this binding, but i had ones an old flexy step in binding on my swoard an the flex front/back was very disturbing. Now I ride the F2 titanium with Intec heels on the boot (because of some other b...

War gestern auf dem Flüelapass und es hat geschneit! die Schneeketten musst ich dann doch nicht montieren

Simon

easily from bomberonline? and why this part isn't on the spare part list? there's only the inner Cuff Cant Assembly and that does definitly not work on the outer joint, because the guidance is on the shell.

an other pair? perhaps during the summer, it's a lot of work to shape this alu plate!

Simon

A few weeks ago my three year old Indy broke at the outer ankle joint. This joint component is riveted and the board shop couldn't repair it. So here is my own solution:

The repaired boot works well and has now survived more than a week of hard riding!

Simon

The wobbling has gone! The problem was the binging setup, because on the small boards I don't mount the boots centered on the bindings to lessen the angle. That means the front boot is placed about 10mm out of the center towards the toes and the rear foot towards the heel. This setup imposes a torsi...

von den "ollen" gibts nur noch ein paar 161 Modelle, steht alles in der Liste 'Last available boards listing'. Das dort aufgeführte 168S ist bereits weg. Ja und die neue Generation kommt wohl erst auf nächsten Herbst.