FAQ: EC, shoes, bindings, boards, tuning, technique, etc.

Various topics, technical questions, announcements, events, resorts, ...

Moderators: fivat, rilliet, Arnaud, nils

Locked
User avatar
fivat
Swoard & EC founder
Swoard & EC founder
Posts: 3010
Joined: Thursday 21 March 2002, 13:13
Location: Geneva, Switzerland
Contact:

FAQ: EC, shoes, bindings, boards, tuning, technique, etc.

Post by fivat » Tuesday 12 December 2006, 22:51

Arnaud has done for us a selection of subjects that are related to frequently asked questions. Thank you to him for this big search work :clap3:
(don't hesitate to also use the tool Search of the Forum)

For any modification or addition, write me an e-mail.

--------------------------------------------------------------------------------
What is extremecarving ?
From the page: https://www.extremecarving.com/tech/excarving.html
Extremecarving.com wrote:Extremecarving is a word invented for this Web site. It identifies the style and the technique developed by Jacques Rilliet and Patrice Fivat from 1995 to 2001 on the carving basis. Invented by alpine snowboarding in the nineties, carving consists simply in riding on the edge. The word "extreme" suggests that the turns are fully laid. The real challenge is to link these turns, frontside and backside, armpit to armpit.
Jacques and Patrice got inspiration from surfing and skateboarding, making rotation of hips and shoulder as taught in the Swiss snowboard school, especially on frontside: they don't face the tip of their board all the time like the racers. They use wide alpine boards (which they had to develop), flat bindings with lower angles and modified hard boots (softer). They also created the word "push-pull" to explain their leg movements whose timing is the opposite of the one in a slalom. Thus their gear and setup are really different from what can usually be seen in alpine snowboarding.
The abbreviation EC is sometimes a source of confusion with "eurocarving", which is an obsolete word from the nineties: during the golden age of alpine snowboarding in Europe, the riders could accomplish very inclinated turns, despite gears with less performance. In extremecarving discipline, the board is sliding, placed vertically on the edge without skipping, and the rider is brushing the snow with his whole body and the armpit. This should not be confused with the "Vitelli turn", which is a figure from the nineties: it's only one turn laid on the front side in counter-rotation.
What is an extremecarving board ?
In the nineties one could find wide alpine boards on the market, but the performances (especially the torsion stiffness) were not very good. In 2000 it was even worse: alpine snowboarding had evolved to much narrower boards. Jacques Rilliet and Patrice Fivat didn't find anymore what they needed (width and performance) for what we wanted to do. That's why they have developed their own board (since 1995 already) and wrote their famous Manifesto in 2002 about narrow alpine boards killing the sport. In 2002 people asked them to commercialize their prototype. So the famous SWOARD appeared: the first and original extremecarving board of the market!
The "wide boards" revival launched by SWOARD was initially criticized, but eventually followed by other board builders (although the width alone is not the secret of the SWOARD).

Can I do extremecarving with any board ?
Of course it's not impossible to lay down at least one turn with any board (even with a freeride board and soft boots). But laying down linked turns (even on the ice) is much easier with a SWOARD than with any other board, as it is the only board designed specifically for this purpose.
Indeed it has been developed and tested intensively on the snow, season after season, by the best specialists of the discipline. At the same time the SWOARD is very versatile and easy to ride.

--------------------------------------------------------------------------------
CHOOSING A SWOARD
viewtopic.php?t=3018
viewtopic.php?t=3339

--------------------------------------------------------------------------------
TESTS AND HARDWARE DISCUSSIONS

Boards
Swoard vs Race board : viewtopic.php?t=2754
Flex considerations :
viewtopic.php?t=3208
viewtopic.php?t=3298
Concave base : viewtopic.php?t=3108

Shoes
Deeluxe / Head / ... : viewtopic.php?t=1270
Deeluxe + RAB +Intec : viewtopic.php?t=732
Deeluxe Track 700 : viewtopic.php?t=3619
Boots forward lean : viewtopic.php?t=1781

Northwave : viewtopic.php?t=794

Shore shin : viewtopic.php?t=1976
Thermoflex : viewtopic.php?t=478
Thermoliners viewtopic.php?t=6598
Sole tuning : viewtopic.php?t=675

UPZ RC11 & RC12 / Mountain Slope .951 : viewtopic.php?f=7&t=13110

Leash
viewtopic.php?t=1046

Bindings
F2 Race Titanium : viewtopic.php?t=1775
Bomber TD2 : viewtopic.php?t=671
PHK (formerly Phiokka) website : https://www.phksnow.com/en/index.html
Catek OS2 : viewtopic.php?t=1884

Gloves
Mitts or Gloves ? viewtopic.php?t=552

Helmet
viewtopic.php?t=463
viewtopic.php?t=48
Helmet & body armour : viewtopic.php?t=537

--------------------------------------------------------------------------------
TUNING

Shoes RAB & spring systems
viewtopic.php?t=1822
viewtopic.php?t=2068
Raichle improvment : viewtopic.php?t=2757
Meaning of springs : viewtopic.php?t=925
Springs for Northwave :
viewtopic.php?t=321 and viewtopic.php?t=1964
ACSS for Deeluxe viewtopic.php?t=8443 (spring system)
:arrow: Head + UPZ tuning and ACSS in PDF format : viewtopic.php?f=7&t=9222&p=99441#p99441
:arrow: DGSS 2.0 for UPZ + Deeluxe / Raichle: viewtopic.php?f=7&t=13502 and viewtopic.php?f=7&t=13872

Binding settings
Angles: viewtopic.php?t=2788&start=15
Stance : viewtopic.php?t=1025
:arrow: Positioning: viewtopic.php?f=8&t=4934

--------------------------------------------------------------------------------
REPAIRS AND SERVICING

Edge repair : viewtopic.php?t=727
Edge sharpener : https://www.tooltonic.com
viewtopic.php?t=1219
Edge angle : viewtopic.php?t=884

Base repair : viewtopic.php?t=865

:arrow: Board maintenance : [UPDATE Nov 2017]
Swoard maintenance guide.pdf
(18.16 KiB) Downloaded 1235 times
viewtopic.php?t=1069

Waxing:
viewtopic.php?t=486
https://www.dragonski.com/us/index.htm
https://www.dominatorwax.com/

Clothes repair : viewtopic.php?t=2948

--------------------------------------------------------------------------------
RIDING TECHNIQUE

Extremecarving (=EC) training : viewtopic.php?t=1005
viewtopic.php?f=7&t=10131
Race technique, counter-rotation, rotation, push-pull, extremecarving (=EC) technique as defined in this Web site, ... :
viewtopic.php?t=3556
viewtopic.php?t=3489
push pull : viewtopic.php?t=3333
stance : viewtopic.php?t=1895

Weight, flex & performance : viewtopic.php?t=413
Backside vs Heel side : viewtopic.php?t=2766
Race technique viewtopic.php?t=2420
Responsibilities when carving : viewtopic.php?t=1387

User avatar
Arnaud
Administrator
Administrator
Posts: 3277
Joined: Friday 24 January 2003, 9:00
Location: Paris - IdF 95

Post by Arnaud » Monday 18 October 2010, 18:06

FAQ updated. New topics added, and some dead links removed.
Swoard EC Pro2 168H - Swoard EC12 Boots - Gen5 168H - Stoke 162 M

Locked